ACES Publication Search
There are 17 search results for:
| Title: | ACES Express Journal December 2017 Cover |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 2168 KB |
| Title: | ACES Express Journal December 2017 Front/Back Matter |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 305 KB |
| Title: | ACES Express Journal December 2017 Full |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 9819 KB |
| Title: | Advanced Statistical 3D Models of Composite Materials for Microwave Electromagnetic Compatibility Applications |
| Abstract: | This article describes advanced tridimensional time domain tools for characterizing composite structures in EMC context. Because of current high interests from industrial areas (e.g., automotive, and/or aerospace), many domains are demanding for reliable and accurate numerical tools to characterize such materials. In this framework, a particular care is granted to mixing theories. This article will demonstrate the interest of trustworthy statistical tools to check at the same time the validity of electromagnetic mixing rules and to realistically calibrate these models. |
| Author(s): | S. Lallechere |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1987 KB |
| Title: | Circularly Polarized Aperture-Coupled Microstrip-Line Fed Array Antenna for WiMAX/C Bands Applications |
| Abstract: | In this paper, a new configuration of broad band circularly polarized (CP) array antenna is presented by a modified feeding network The proposed feed network includes two hybrid 90-degree branch line coupler and a 180-degree rat-race coupler. The feed network of array provides sequential rotation condition for consisting of four L-shaped microstrip lines which coupling through four ring-shaped slots. Each element of array is printed on two layer of substrate which connected together with a ring aperture. Employing wideband CP elements and feeding network structure causes the creation of innovation at CP array. The 3dB axial-ratio bandwidth of the array extends to approximately 650 MHz with impedance bandwidths of 24.7% for C-band applications and a relative high gain of about 10.2 dBic. The performance of the antenna has been approved by comparing between measurement and simulation results. |
| Author(s): | V. Rafiei, H. Saygin, S. Karamzadeh |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1826 KB |
| Title: | A Broadband Dual-Polarized Antenna for TD-SCDMA System |
| Abstract: | A broadband dual-polarized antenna is proposed for TD-SCDMA system. The dual-polarized antenna is combined with two perpendicularly crossed dipoles. Crossed dipoles can reduce the same frequency interference and improve the signal reception effect. The isolation of this dual-polarized antenna is greater than 25 dB for co-polarization and 28 dB for cross-polarization. The measured results demonstrate that voltage standing wave ratio (VSWR) is no more than 1.3 at the operating frequency and the antenna has an average gain of 8.3 dBi for slant polarizations. That is, our proposed antenna meets the requirements for stringent design. We use array antenna technology based on the requirements of gain and beam tilt. A 5-element dual polarized antenna array is realized by 5-way unequal power divider at 1880 - 2635 MHz. The antenna gain of the array is about 12.5 dBi for different polarization. In numerical and measured results, the specific design methods and ideas of antenna and power divider are presented. As we can see from the test results, the antenna presented in this paper is far better than the industry standard. |
| Author(s): | Z. Liu, Y. Li, J. Liu, Y. Zhang, X. Wu, Y. Zhou |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1870 KB |
| Title: | Frequency and Time Domain Analysis of Planar UWB Antenna Controllable WIMAX/WLAN Band-Notched Characteristics |
| Abstract: | An ultra wideband (UWB) printed monopole antenna with dual band stop characteristics is proposed in this article. Distinctive feature of this antenna is the notched band control ability with improved operating bandwidth. By employing modified lambda/2 vertically combined T and U-shaped conductor backed plane, a sharp band notch is achieved with notched band of 3.3– 3.7 GHz. In order to obtain another notched frequency band of 5.1-6 GHz, a rectangular spiral shaped lambda/4 open stub has been incorporated to the microstrip feed line. Frequency rejection performance can be controlled flexibly by varying various parameters and positions of the corresponding band notched elements. Furthermore, additional resonance at higher frequencies has been generated by introducing a metal loaded complimentary split ring resonator (MLCSRR) to the ground plane, so that it provides enhanced usable fractional bandwidth (2.6-13.9 GHz) more than 136%. The performance of the proposed antenna is analyzed both in frequency and time domain to assess its suitability in UWB communication. |
| Author(s): | R. Sanyal, D. Bhowmik, P. P. Sarkar, S. K. Chowdhury |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 2022 KB |
| Title: | An Ultra-Wideband Absorber Backed Planar Slot Antenna |
| Abstract: | Planar antenna designs have many advantages such as low-profile, light-weight, and ease of fabrication and integration. Here, a planar slot antenna implemented on ceramic substrate with coplanar waveguide feed is considered. With absorber loading the design provides 50 omega input impedance over the frequency range 0.3–3 GHz so it is considered ultra-wideband. This paper summarizes a numerical investigation using both frequency and timedomain solvers. The results serve to guide the future analysis of broadband antennas with lossy dielectric loading for ground penetrating radars. The evaluation of radar performance requires further simulation and model validation based on antenna measurements. |
| Author(s): | W. O. Coburn |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1551 KB |
| Title: | Simple Configuration Low-pass Filter with Very Wide Stop Band |
| Abstract: | In this paper, a compact microstrip low-pass filter with elliptic-function response is presented. A halfring along with two half-elliptic patch resonators is cascaded to design a compact low-pass filter with very wide stop band and high selectivity in a small circuit area. This filter has the stop band from 3.3 up to 27.57 GHz with attenuation level better than -20 dB. The proposed filter has low insertion loss in the pass band and stop band, high return loss (RL), and very wide rejection in the stop band, along with compact size and simple configuration .The filter is designed, fabricated and measured. Simulation and measurement results are presented and compared to previous researches. The results of simulations and measurements are in agreement. |
| Author(s): | B. F. Ganji, M. Samadbeik, A. Ramezani, A. Mousavi |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1637 KB |
| Title: | GA Optimization of the Optical Directional Coupler |
| Abstract: | Optical couplers, which are passive devices, couple optic waves through optical waveguides and can be employed in many applications, including power splitters, optical switches, wavelength filters, polarization selectors, etc. In this work, a simple, fast and instant optimization design is presented for an optical directional coupler based on Genetic Algorithms (GA). This optimization design is preferred due to its favourable usage and fast convergence capability. Finally, the designed methodology has been analytically and experimentally evaluated and the results show that the GA is an advantageous method for designing an optical element where the measurable data is obtainable instead of complex formulas. |
| Author(s): | P. Ozkan-Bakbak |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1934 KB |
| Title: | Phased Array Beam Steering Through Serial Control of the Phase Shifters |
| Abstract: | The commands to control the phases shifters in a phased array can be sent through a parallel or serial channel. Parallel commands simultaneously change the phase shifters, allowing the beam to nearly instantaneously hop from one direction to another. If a serial channel is used, then the commands are sequentially sent to the phase shifters. The sequential approach causes the beam to gradually move from one position to another, rather than the quick hop encountered with a parallel channel. This paper shows simulated results of the behavior of the array factor due to serial phase shifting and effects the element sequence has on that behavior and a method to optimize the command sequence. |
| Author(s): | R. L. Haupt |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1600 KB |
| Title: | Merging VSim’s Model Building and Visualization Tools with Custom FDTD Engines |
| Abstract: | This work demonstrates how the graphical user interface of VSim (electromagnetic simulation software package) is modified and utilized to run a custom finite difference time domain algorithm. Commercial programs typically offer conventional FDTD functionality. More often than not, researchers may want to use their own code versions with proprietary modelling tools and extensions; for example, high-order differencing or specialized absorbing boundary conditions. VSim offers the flexibility of integrating an independent FDTD solver-engine that is tailored for the end user’s needs. A detailed example is presented here of the replacement of VSim’s own FDTD engine with a high-order FDTD code written with CUDA Fortran. Other custom FDTD codes could be integrated using the presented procedure. |
| Author(s): | R. Smith, A. Weiss, R. Bollimuntha, S. DMello, M. Piket-May, M. Hadi, A. Elsherbeni |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1895 KB |
| Title: | Novel Microstrip Ultra-Wideband Bandpass Filter Using Radial-Stub-Loaded Structure |
| Abstract: | A novel planar ultra-wideband (UWB) bandpass filter (BPF) using radial-stub-loaded resonator is proposed, where the resonator consists of three radial stubs, one located in the middle and two symmetrically at both sides. This radial-stub-loaded structure situates the first four resonant modes in the UWB passband (3.1~10.6 GHz) and makes the fifth resonant mode far away from this passband. To enhance the coupling degree, two interdigital coupled feed lines are utilized in this UWB filter. Finally, a UWB BPF with wide upper-stopband and sharp upper rejection skirt has been realized and its design steps have been also presented. The measured and full-wave simulated results of the proposed filter are in good agreement. |
| Author(s): | X. Deng, K. D. Xu, Z. Wang, B. Yan |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1757 KB |
| Title: | Slotted Triangular Monopole Antenna for UHF RFID Readers |
| Abstract: | A new compact slotted triangular monopole antenna for ultra-high frequency (UHF) radio frequency identification (RFID) applications is presented. The antenna exhibits an omnidirectional radiation pattern and has a bandwidth (BW) of more than 13%. It covers the global UHF RFID band and has a maximum gain of around 2.6 dBi. An overview of the antenna design along with the full wave simulation is provided. A prototype of the antenna is fabricated and tested. Good agreement is obtained between simulated and measured results. Moreover, the antenna is used with a UHF RFID reader in real use cases where read range and read rate with different commercial tags are used to evaluate the antenna performance. |
| Author(s): | K. ElMahgoub |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1842 KB |
| Title: | A Broadband Microstrip-to-Microstrip Vertical Via Interconnection for Low Temperature Co-Fired Ceramic Applications |
| Abstract: | This letter presents a microstrip-to-microstrip vertical via interconnect in microwave low temperature co-fired ceramic (LTCC) technology. According to the simulation results, the insertion loss is less than 0.33 dB and the return loss is greater than 29.9 dB from 0.3 GHz to 18 GHz. An equivalent lumped model is developed for analyzing the microstrip-to-microstrip vertical interconnection. The structure has been manufactured and measured. |
| Author(s): | Y. Liu, L. Xia, R. Xu |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1643 KB |
| Title: | Metamaterial Inspired Square Ring Monopole Antenna for WLAN Applications |
| Abstract: | This paper describes the design of a compact dual band monopole antenna using a metamaterial inspired split ring structure for WLAN (2.4/5.2/5.5 GHz) applications. The antenna is printed on a 20x20x0.8 mm3 FR-4 substrate. It consists of two concentric square rings with a partial ground plane and is fed by a microstrip line. A split in the outer ring is introduced to induce magnetic resonance which in turn yields a narrow lower band resonance at 2.4 GHz. The position of the split in the ring plays a vital role in inducing the magnetic resonance. The extraction of negative permeability of the ring structure with and without the split is discussed to verify the metamaterial property existence. A prototype of the proposed structure is fabricated and the measured results comply greatly with the simulated results. The antenna has consistent radiation pattern over all the working region. |
| Author(s): | S. Imaculate Rosaline, S. Raghavan |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1580 KB |
| Title: | Mutual Coupling Characterization of Ultra-Wideband U-Slot Microstrip Patch Array Antennas |
| Abstract: | Ultra-wideband (UWB) phased arrays are increasingly used in radar and medical applications. Mutual coupling reduction between the phased array elements is critical in achieving good scan bandwidth. This study investigates the mutual coupling of a UWB U-slot microstrip patch 2-element array to find the patch orientation and U-slot topology with the least mutual coupling. Electromagnetic (EM) simulation results indicate that, for epsilon r = 2.2 substrate, diamond patch orientation with opposite U-slot topology has the least coupling between the array elements. Results also indicate that the current density distribution on the microstrip patch has an effect on mutual coupling between the array elements. Results show good agreement between MoM and FEM EM solvers. |
| Author(s): | M. M. Elsewe, D. Chatterjee |
| File Type: | Express Journal Paper |
| Issue: | Volume: 32 Number: 12 Year: 2017 |
| Download Link: | Click here to download PDF File Size: 1864 KB |